Photo 1: 001 Vector Board The space underneath the layout frame is determined by the thickness of the closed cell foam support. That space is ¾ inch finished, in other words: 0.70" (18 mm). I need a little extra clearance to protect the wiring, like a ¼ inch (6 mm), because the bottom must be capable to slide in/out of my motorhome storage compartment. Commercial barrier strips are too high! Therefore I decided to make my own “shallow” barrier strips from “Vector Board”. I bought 3 vector boards with predrilled holes at 0.1” by 0.1” grid. I cut the board lengthwise in strips. See the marking on the board

Monday, 10 March 2008

1695

0

85.88 KB (800 x 601 px)

Dalman_Ed

1,186.57 KB (2832 x 2128 px)