Stuff for Z

Start
Prev
1
Next
End

SJ-BAZ-man
Offline
DCC Moderator

16 years 1 week ago #546 by SJ-BAZ-man

Stuff for Z was created by SJ-BAZ-man

Lets try and find material, products, anything that can be used in Z for scratch building or just that extra visual effect.

I found this N scale etched brass fence that can easily be used for Z.

From N-Scale Architect (Walthers 716-50045). Etching shown with Z scale figures, MTL flex roadbed for scale compare. Horizonatal rails are 2' apart. Cut the lower section off for a 2' garden/yard fence. Fence boards are 3.4" to 4.8" wide.

Please Log in or Create an account to join the conversation.

SJ-BAZ-man
Offline
DCC Moderator

16 years 1 week ago - 13 years 2 months ago #547 by SJ-BAZ-man

Replied by SJ-BAZ-man on topic Re:Stuff for Z

Here are some N scale bumpers that I easily cut down to Z. From Walthers Cornerstone Series (933-2602). $11 for 5. Not the I-beam style I wanted but I need a lot for the yard and they are cheap. 3' viewing rule

Need some appropriate brown paint, tagging, and rust.

Jeff

Please Log in or Create an account to join the conversation.

Rowan
Offline
New Member

16 years 1 week ago - 13 years 2 months ago #552 by Rowan

Replied by Rowan on topic Re:Stuff for Z

A lot of scenic materials can be picked up with a walk in the park.

True !

Please Log in or Create an account to join the conversation.

andyjbj
Offline
Junior Member

16 years 1 week ago #555 by andyjbj

Replied by andyjbj on topic Re:Stuff for Z

Well, this is an opportunity to ....not *bash* but just discuss a Z scale product..... the etched sunflowers from Z Track center are awesome but very, very large. They are actually closer in size to HO Busch sunflowers than the TT/N ones! So I will be pulling mine out and using them on my TT layout. I do recommend them as they very nice, but the Busch TT/N ones are significantly smaller.

Please Log in or Create an account to join the conversation.

andyjbj
Offline
Junior Member

16 years 1 week ago #571 by andyjbj

Replied by andyjbj on topic Re:Stuff for Z

this is also a chance to ask a question starting to be important for our city module ... anybody know of a material that can suitably serve as chain link fencing in Z?

Please Log in or Create an account to join the conversation.

Kelley
Offline
Dispatcher

16 years 1 week ago #604 by Kelley

Replied by Kelley on topic Re:Stuff for Z

Good Question..I need about 3 meters!!! of the stuff myself. No way can I afford that little screen stuff that's at most 20 cms.

Please Log in or Create an account to join the conversation.

andyjbj
Offline
Junior Member

16 years 1 week ago #605 by andyjbj

Replied by andyjbj on topic Re:Stuff for Z

What is the little screen stuff you speak of?
I was thinking of using pantyhose. I think it would work.

Please Log in or Create an account to join the conversation.

Socalz44
Offline
Moderator

16 years 1 week ago #606 by Socalz44

Replied by Socalz44 on topic Re:Stuff for Z

Many people like to use wedding vale material for chain link fencing. Cheers, Jim CCRR:)

Please Log in or Create an account to join the conversation.

Kelley
Offline
Dispatcher

16 years 1 week ago #607 by Kelley

Replied by Kelley on topic Re:Stuff for Z

The thing I seen was a piece of very fine photo etched screen stuff about 100X50 or so at the show in Cologne. It was too small and Id have to cut it so it is only good for maybe a fence for a house or two..Think it was about 15 Euros. Too little for too much..Is the wedding veil stuff fine enough?

Please Log in or Create an account to join the conversation.

liltoot
Offline
Junior Member

16 years 1 week ago #611 by liltoot

Replied by liltoot on topic Re:Stuff for Z

i found this fabric in michaels thats fine and has the diamond pattern.its a ribbon for show,, the only problem was it was plaid!!! hard to paint, fabric. but i did manage to get enough to do about 400 feet of fencing, tho i wasted 2/3rds of it trying to color it. haha. its super cheap, 27 cents a foot, so i didn t mind. i just bought some more this week, i m thinkig of dying it this time. mike

Please Log in or Create an account to join the conversation.

SJ-BAZ-man
Offline
DCC Moderator

16 years 1 week ago #621 by SJ-BAZ-man

Replied by SJ-BAZ-man on topic Re:Stuff for Z

The wedding veil idea sound good. Have to look at that. There are some fine screen materials out there, just need to find other sources.

Lajos posted a pix of some that he good some time ago from Germany.

Jeff

Please Log in or Create an account to join the conversation.

Kelley
Offline
Dispatcher

16 years 1 week ago #633 by Kelley

Replied by Kelley on topic Re:Stuff for Z

I just found some stuff in the fabrics section of a craft store..very fine material in a ribbon and it scales out to about 2,40 meters high! Perfect height. No need to cut fabric at all. Trouble is it is weird yellow metallic color. they had it in black too but this will be good for experimenting as 3 meters were like 4 Euros. Another problem is is the "wire" runs up and down and not diagonal, but, while playing with it and kind of pulling the top part of ribbon one way and bottom the other, it puts a diagonal look to it. I just have to pull it that way and glue it on the poles..

Please Log in or Create an account to join the conversation.

zthek
Offline
Junior Member

16 years 1 week ago #639 by zthek

Replied by zthek on topic Re:Stuff for Z

OK, time to confess. I have a great supply of this brass mesh, also tons of etched brass components and all kind of weird stuff. The first internet scrapyard will be open soon, next to the zthek store . It will be a bargain source of scratch building supply, brass, plastic, wood, electronics and other junk (I mean treasure). The prices will include shipping, and no minimum to buy. I'll start with a few (25-30?) things, but in a couple of weeks, the scrapyard will be big. More difficult times are ahead, building your own stuff can be the perfect solution to keep Z-scale alive and well.

Lajos:)

Please Log in or Create an account to join the conversation.

Bobdocker
Offline
New Member

16 years 1 week ago - 13 years 2 months ago #645 by Bobdocker

Replied by Bobdocker on topic Re:Stuff for Z

Here's a few ideas for Z scratch building.
Plastruct makes trusses that can make an easy truss bridge. The for sale sign is an excellent source of cheap styrene for scratch building. The 5 pole fence (Neal's nguaging trains: Walthers 530-037) is an excelent source of Z scale hand rail (when cut in half horizontally).

Please Log in or Create an account to join the conversation.