Random Modeling Tip
Simple window shades made from masking tape. Take the plain old masking tape roll, the off-white color and cut a piece off to place on the inside of the building window. Usually covering the top half of the window is the way to go to show a half drawn window shade. But to mix it up you can cover any amount of window to show a fully drawn window shade to a partially drawn window shade. And they do make masking tape in various colors to match your need!
GeneralRandom Articles

Detailing Stony's LCL Cement Canisters Here is a photo of the cement canisters in their raw form. I cut the sprue lengthwise, so the sprue will now act [ ... ]
InstructionalsRead more...
Hopper Weathering Clinic II
By Bill Mock
December 2009
So here's how those BN Hoppers turned out after the surface rust dried. Not bad. I'll [ ... ]
InstructionalsRead more...
Uncle Sugar gave me a bit a change, so as soon as I could, I got in touch with my favorite dealer. Picked up another B unit for the CB&Q (this [ ... ]
MyBlogRead more...