Forgot Login?   Sign up  
Thursday, March 28, 2024

100 3589s

The sawmill has a permanent place in our hobby as an industry built in the sticks. The location of these structures usually is located far from civilization and the scenes displayed in historical records show a real rag-tag operation. The oportunity to create a busy and living scene with this model is one I cannot let pass.

100 3457Micro-Trains offers kits in Z scale. The kit is comprised of laser cut micro-plywood and card material for windows, doors and frames. This card material has two-sided tape for glazings and roofing. Even the glazing for the windows is cut with a laser.

The instructions are made like an electronics manual. I have to say they are perfect and the pictures do just enough to get you through the build. As the instructions stated, we placed the two walls and supports on the base and glued them with WeldBond glue. I use Weldbond because of its Cost, Strength, and the fact that it dries clear. Some say to use Canopy Glue, but it is twice the cost and comes in a bottle near half the size. You decide.

Next step is to prepare the equipment deck. The saws and log tables are all represented in Card. When all is said and done, this looks great. I only had an issue with "How big is a loggers log in Z scale"? That issue actually held me up longer then it really should'a.

100 3462100 3467100 3474

100 3481

I built this model so fast, the instructions seemed to get lost under a pile of carrier sheets. I usually build the walls complete before assembling them together. This time we just got busy with it, and this ended up with walls assembled without the windows and door installed. 

The amount of interest this kit struck in me had me a bit overwhelmed, so I sat down with the instructions and finally finished them.

Here are a few shots of the equipment deck installed. This is really a striking site in person.

100 3478100 3482100 3483

100 3484Whoever started this technique in kit building is a patron saint. Two-sided tape on small structure kits is the component that makes this build available to a visually imapired person like myself. A pair of tweezers and a good light and I am set. 100 3489

Peel off the back of the window and place it sticky side up on the bench. Take the tweezers and break out a single glazing and place it on the window. Done deal! Repeat that for all the windows and doors and in no time everything was completed and ready to be installed.

100 3490Here is the model with the windows, doors and trim installed. I left the window sills off. One reason is I thought they looked big and reason two, I had trouble handling them. Is it absolutely neccesary ?

I thought not...

100 3494It is amazing how small this structure is considering the size of the prototype. So far I love the instructions, as they are simple and to the point, I could have used a prototype photo though. The kit parts are great, the laser cuts are clean and come apart easily. And the addition of the interior equipment really makes this $76 model worth every penny.

100 3495Again, bdecause of the two-sided tape, these roof panels are a breeze to complete. After gluing the panels to the structure, I peeled off the tape covering. The laser cut paper shingles are varied in sizes. My suggestion is to use the wide ones on the bottom and the narrow ones on the top.

100 3497I use tweezers for this proceedure, I have learned my big fingers are actually z scale battering rams. The shingles look fantastic installed and I can see already how I am going to weather them.

The ramp, or slip, is made of plywood with card braces. For such small parts I have to say this was fairly easy. The braces have two-sided tape to stick right on, using the tweezers of course. I could not wait to see it next to the structure, so I took a picture of it.

100 3500100 3501100 3504

100 3515After completing the slip I really started thinking about building this Z scale layout. Its funny how a model can inspire you. This arrived Friday in the mail, and was built by Sunday Night.

Micro-Trains hit a home run with this model and I am just tickled I had a chance to build it. To be inspired by a model isn't too rare, but that don't make it any less exciting.

Stay tuned for part two.

Ron Pare

Comments powered by CComment